![Beechcraft Beech 95 2017 Скачать руководство пользователя страница 68](http://html.mh-extra.com/html/beechcraft/beech-95-2017/beech-95-2017_pilots-information-manual_2720130068.webp)
Selkirk College IATPL Program Manual
Beech 95 POH
Effective September 1, 2005
Appendix 14 - 68
necessary. Most of the switches are fused. The magnitude of fusing is imprinted on the
tip of each switch. Should amperage exceed the value of the fuse the switch will move to
the off position. The switch cannot be reset. Pilots must not attempt to hold a switch with
a failed internal fuse in the on position.
On GSAK the pilot side sub-panel also contains the amber Cowl-Flap position light.
The sub-panel also contains the voltage-regulator switch. The voltage regulator is
explained in section 8, electric system.
Power Gauge Panel
The power gauge panel is just above the center console and power controls. It contains
the manifold pressure gauge, tachometer, fuel flow gauge, two ammeters and two fuel
quantity indicators.
The tachometer and manifold pressure gauges each have two needles labeled L and R for
the left and right engine respectively. The ammeters indicate amperage output from the
alternators in the range zero to fifty amps. The fuel quantity gauges are controlled by a
switch on the pilot sub-panel, as explained above under fuel system.
Center Console
The center console extends from the center of the instrument panel to the floor. At its top
are the engine power controls; propellers, throttles, and mixtures. The control yoke is
mounted below the engine power controls. The elevator and rudder trim actuator wheels
are mounted below the yoke. The aileron trim actuator is in the center of the control yoke.
Panel lighting knobs are adjacent to the elevator trim wheel. Alternate air knobs are on
the front of the lower section of the console. A nose gear position indicator is at the
bottom of the console.
Power Plant Controls
Propeller, throttle, and mixture control levers are grouped along the upper face of the
center console. Propeller levers are on the left, throttles in the middle and mixture
controls on the right. Each control has a unique shape and texture so that they can be
identified by touch.
The levers are connected to their respective units by flexible control cables routed
through the leading edge of each wing. A controllable friction lock on the console may be
tightened to prevent creeping.
Trim Control Wheels
Trim tabs are mounted on the rudder and elevators and are controlled by two manual
control wheels on the console. The vertical wheel controls the elevator trim. Rotating the
wheel forward applies nose-down trim; rotating the wheel backward applies nose-up trim.
A horizontal wheel just below the yoke attachment controls rudder trim. Rotating the
wheel to the left applies left rudder trim while rotating it to the right applies right rudder
trim.
Содержание Beech 95 2017
