Supplied Hardware:
(8) TRAX slot mounts,
(8) 1/4-20 X 1 1/4” phillips combo head,
(8) 1/4-20 serrated flange nuts, (4) Side towers,
(4) 1/4-20 x 3/4 button head bolts, (4) D-ring tie downs,
(1) 58” Guardrail
Tools Needed:
Phillips screwdriver, 1/8” allen wrench,
7/16 wrench
SIDE KIX
STEP 1.
ATTACH TOWERS TO SIDE KIX
Align pre-drilled holes inside the bins with the mounting holes on each TOWER. Flat side of the
TOWERS must face out. Secure the TOWERS to each SIDE KIX using the supplied 1/4-20 x 1 1/4
Phillips combo head bolts and 1/4-20 serrated flange nuts as illustrated below.
DO NOT OVER TIGHTEN THE HARDWARE!
NOTE: The SIDE KIX are directional so make certain the “BEDSLIDE” logo is facing forward and out!
DRIVER SIDE
LEFT/
PASSENGER SIDE
RIGHT/