Beckman Coulter UniCel DxC 600, Инструкция по эксплуатации

Страница: 375 / 498

A13914AF
10-11
System Status and Commands
Stop Print
10
Type
1, 2
or
3
in the
Option Number
field and press
(
Enter
)
.
NOTE
Press
RUN
to continue the run after a Pause.
IMPORTANT
Do not request a Pause and leave the system sitting for a long period of time without washing
the cuvettes. If cuvettes are left sitting with reactant, evaporation will occur, leaving encrustation on the
sides of the cuvette that may require washing by hand.
Stop Print
Introduction
Stop Print will stop print requests that are still in the print queue and prevent them from being sent
to the printer. This feature is useful in stopping print requests composed of many pages, such as the
entire Event Log, some QC reports, or preventing multiple print requests.
How Stop Print Works
Print requests are stored in the printer queue in the console. As portions of these requests are ready
to print, they are sent to the printer buffer and ultimately printed.
Stop Print deletes all of the print requests in the queue. Any portions of the print request already in
the printer buffer, which could be several pages, will be printed.
Stop Print
1
Select
Instr Cmd
from the menu bar.
2
Select
3 Stop Print
.