Beckman Coulter UniCel DxC 600, Инструкция по эксплуатации

Страница: 181 / 498

A13914AF
5-17
Quality Control
QC Chart (Levey-Jennings)
5
5
The chemistries defined for the selected control are listed. All chemistries appear to be
selected.
For convenience, there are two ways to select the chemistries to chart:
•
To chart most of the chemistries shown, select all chemistries which should NOT be
charted. Then select
Remove
.
•
To chart less than half of the chemistries shown:
— Select
Remove All
.
—
Select the chemistries to chart.
Multiple selections are allowed. Use the scroll bar to access additional chemistries.
NOTE
User-defined chemistries which have been cleared cannot be retrieved for QC Chart.
•
Select
OK
to show the QC Chart(s).
•
Select
Cancel
to cancel the Chart request.
6
Select
Next F8
to access all requested QC charts. Each of the requested charts appear in the
order of the control chemistry configuration.
7
Select
Print F9
to print a copy of the Chart.
8
Select
Chems F1
to specify additional chemistries for charting.
9
Select
Filenum F2
to specify additional file numbers for charting.
10
Select
Done F10
to exit the
QC Chart
dialog box.