Beckman Coulter UniCel DxC 600, Инструкция по эксплуатации

Страница: 171 / 498

A13914AF
5-7
Quality Control
Control ID Assignments
5
Control ID Assignments
Introduction to Assignment of QC Bar Codes
A maximum of eight bar codes (control IDs) per control may be defined. Assignment of bar code IDs
is mandatory for Auto Generation of controls.
Assignment of QC Bar Codes
1
Select
Control ID F2
from the
Define/Edit
dialog box.
2
The
Control ID
dialog box appears. A maximum of eight unique bar code IDs with a maximum of
15 alphanumeric characters may be entered. Press
(
Tab
)
after each bar code entry to move
between fields.
When creating Control Bar Code IDs, use a format that is distinctly different from Sample IDs.
This will prevent the reporting of erroneous results due to Controls being run as patient
samples, or patient samples being run as controls.
Example:
Control Bar Code ID: SYNCHRON01
Sample Bar Code ID: 0000001
3
Select
OK
to exit the screen and save the bar code IDs.
OR
Select
Cancel
to clear all modifications.
Print Bar Code Assignments
Press the
(
PrtScn
)
key to print the Control ID assignment window.
Run Control Samples
Introduction
When the control is defined, the control sample runs on the instrument with or without bar code
labels. The following procedures describe how to run a control sample for each condition.