Beckman Coulter Optima LE-80K, Инструкция по эксплуатации

Страница: 32 / 52

2-7
Run Preparation
____(((())))''''))))0000aaaa
(Deceleration)
The instrument has three deceleration profiles: maximum, slow, and
no brake. (The default setting is MAX.) To select slow deceleration,
press
_()')0a
. The SLOW run status indicator will light. The key acts
as a toggle switch; press it again to select NO BRAKE and again to
select MAX deceleration. Each time you press the
_()')0a
key, the
next choice in the series will light.
PROGRAMMED OPERATION
____4444666633
3 3+++ +aaaa
(Program)
and
____7777%%%%::::))))aaaa
The instrument internal memory is capable of holding up to nine sets
of user-specified run conditions, referred to as programs. Each
program is stored by number and can be recalled using the keypad.
Programs are retained in memory even when the power is turned off.
You can select an existing program by either pressing the program
number (1 to 9) using the keypad, or by pressing the
_463+a
key
repeatedly until the desired set of parameters appears. (This is useful
if you do not remember the contents of a particular program or to scan
through available programs.)
Follow the instructions below to create a new program or to modify
an existing one.
To create or modify a program:
1. Press
_463+a
. If no program has been previously selected, a dash
will appear above the
_463+a
key. Actual values remain in the
other displays.
2. Use the keypad to select a program number, which replaces
the dash in the display. (Or continue pressing
_463+a
until the
program number appears.) The program number blinks to indicate
that you are editing the program.
3. Use the parameter keys and keypad to enter the run settings. After
all parameters have been entered, press . The SAVE
indicator blinks indicating that you may save the program.
4. Press
_7%:)a
and the program will be stored in memory under the
assigned number. Actual values will reappear in the displays.
ENTER/RECALL