Recalling Results by Patient Name
Introduction
Results Recall
IMMAGE 800 Operations Manual A11403
Page 8-8
September 2016
Recalling Results by Patient Name
Introduction
Results can be recalled by Patient Name.
Recalling by Patient Name
Follow the steps below to recall a result by Patient Name.
Step
Action
1
Select
Results
from the menu bar. (Refer to Figure 8.1.)
2
Enter the Patient Name in the
Patient Name
field.
NOTICE
The results are recalled only when there are exact matches of the last name,
first name and middle initial. A wildcard (*) is allowed for middle initial
entry. In this case, samples are retrieved based on exact matches of the
last name, first name with any or no middle initial.
3
Select the options button
<
▼
>
beside the
Data Source
field.
4
Select
Computer
to recall results in the current database stored in the hard
disk.
OR
Select
Diskette
to recall results from diskettes that have been restored into
the hard disk. (Refer to CHAPTER 10,
Utilities
instructions on how to back up and restore the database.)
NOTICE
Patient results restored from diskettes cannot be sent to the host.
5
Select a function button from the bottom of the screen.
6
Refer to Displaying Recalled Results on the Screen and Printing Recalled
Results in this chapter to display or print results.