Beckman Coulter CESI 8000, Руководство по предварительной установке

Страница: 25 / 46

B11953AC 1-1
CHAPTER 1
Preinstallation Requirements
Preparation Check List
The following is a summarized list of the requirements that must be addressed, and the components
that must be obtained, prior to installation. To ensure a successful installation, please verify that
the requirements have been fulfilled and that you have the system components listed below. When
completed, contact your local Beckman Coulter representative to schedule the installation.
IMPORTANT
CESI 8000 customers (i.e., up to two operators) must be Mass Spectrometer trained, willing to
be trained, and available to operate the Mass Spectrometer during installation.
CESI 8000 Requirements
Use this list to check the requirements that must be fulfilled at your site prior to installation.
•
All reagents must be ordered and present at the site by the time of installation ( Preparing the
Site in CHAPTER 2, Site Requirements and Specifications )
•
Suitable laboratory environment ( CHAPTER 2,
Site Requirements and Specifications
)
•
Appropriate space for cart and instrument ( Space and Ventilation Requirements in CHAPTER 2,
Site Requirements and Specifications
)
•
Power source ( Electrical Requirements in CHAPTER 2, Site Requirements and Specifications )
•
All components arrived undamaged ( Upon Receiving the CESI 8000 System in CHAPTER 3,
Preparing CESI 8000 for Setup )
•
Training prerequisites met ( CHAPTER 4,
CESI 8000 System Training
)
CESI 8000 System Components
The following is a list of the primary components shipped by Beckman Coulter for a CESI 8000
system. Use this list to check off the items as you receive them.
System Components
•
CESI 8000 Instrument
•
CESI 8000 Mobile Cart
•
CESI 8000 Computer System