manualshive.com logo in svg

Beckhoff TwinSAFE EL6910, Руководство по эксплуатации, Страница: 97 / 144

Поделиться
Скачать
Beckhoff TwinSAFE EL6910 Скачать руководство пользователя страница 97

Operation

EL6910

97

Version: 1.8.0

Access Rights

Description

Change Password

Users can change their password.

Download Safe Logic Data

The user can load the safety-related program onto the EL6910, EJ6910 or
EK1960.

Download Mapping Data

The user can load the mapping data for inputs, outputs, FBs etc. onto the
EL6910, EJ6910 or EK1960.

Download Safe User Data /
Replacement Values

The user can change safe user parameters on the EL6910, EJ6910 or
EK1960 and also change and load safe substitute values

Download Info Data

The user can activate and load the info data for connections and FBs on
the EL6910, EJ6910 or EK1960.

Download Project Data in
Restore Mode

The user can perform a restore. Not currently supported.

Activate / Deactivate Groups

The user can execute Customizing (enable and disable TwinSAFE groups)
on the EL6910, EJ6910 or EK1960.

4.8

Backup/Restore

Following the exchange of an EL6910, EJ6910 or EK1960, the previous project can be loaded to the new
device using the 

Backup/Restore

 mechanism.

In order to be able to use this functionality, the 

Backup/Restore

 mechanism must be enabled in the safety

project, and the terminals must be selected, on which the current CRC of the safety project is to be stored.

For a restore operation the user can specify the minimum number of selected terminals on which the correct
CRC must be stored.

Using the checkbox 

Restore User Administration

 the user can specify whether the user administration should

be transferred to the new device via the restore mechanism.

Fig. 128: Backup/Restore

In order to be able to use the 

Backup/Restore 

mechanism, create a backup of the current safety project and

store it on the hard disk of the controller, for sample. To carry out a restore, the user can either check when
starting the controller whether the serial number of the EL6910, EJ6910 or EK1960 has changed, or start the
restore manually via a service menu, e.g. in the visualization. Detailed information about the 

Backup/Restore

mechanism is available from Beckhoff Support.

Содержание TwinSAFE EL6910

















































































































































Отзывы:

Нет отзывов