Beckhoff PS1111-2403-0000, Документация

Страница: 20 / 31

Technical data, mounting, wiring
PS1111-2403-0000 20 Version: 1.0
3.12 EMC
The EMC characteristics of the device make it suitable for application in industrial environments as well as in
residential, commercial and light industrial areas and small businesses.
The device complies with the following standards: EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN
61000-6-4, EN 61000-3-2 and EN 61000-3-3.
This device complies with FCC Part 15. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must be able to deal with any interference received,
including interference that may cause undesired operation.
Do not use this device on an AC 100V mains supply with a load of more than 2.9A, if the application is
sensitive to a short circuit at the output, even with voltage drops during mains interruptions of less than
20ms.
Without additional measures to reduce conducted emissions at the output (e.g. by using a filter), the device
is not suitable for supplying a local DC power network in residential, commercial or small business
environments. There are no restrictions for local DC power networks in industrial environments.
EMC interference immunity
Strong transients VDE 0160 Over the entire load range 750V; 1.3ms
EMC interference emission According to the generic standards: EN 61000-6-3 and EN 61000-6-4
Conducted interference emission, input
lines EN 55011, EN 55015, EN 55022,
FCC Part 15, CISPR 11, CISPR 22 Class B
Conducted interference emission, output
lines IEC/CISPR 16-1-2, IEC/CISPR
16-2-1 Limit values for the DC current connection are not
met
Interference emission EN 55011, EN 55022, CISPR 11,
CISPR 22 Class B
Harmonic input current EN 61000-3-2 Class A requirements met
Voltage fluctuations, flicker EN 61000-3-3 Met, tested with non-pulsating constant current
loads.
Switching frequencies
Main converter 5kHz to 120kHz Input load and output voltage dependent