Beckhoff PS1011-2420-0000, Документация

Страница: 21 / 32

Technical data, mounting, wiring
PS1011-2420-0000 21 Version: 1.0
3.13 EMC
The power supply is suitable for application in industrial environments as well as in residential, commercial
and light industrial areas and small businesses.
The device complies with the following standards: EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN
61000-6-4, EN 61000-3-2 and EN 61000-3-3.
Without additional measures to reduce conducted emissions at the output (e.g. by using a filter), the device
is not suitable for supplying local DC power networks in industrial, private, commercial or light industrial
environments.
EMC interference immunity
Strong transients VDE 0160 Over the entire load range 750V, 0.3ms
EMC interference emission
Conducted interference emission, in-
put lines EN 55011, EN 55015, EN 55022, FCC Part 15,
CISPR 11, CISPR 22 Class B
Conducted interference emission,
output lines
2)
IEC/CISPR 16-1-2, IEC/CISPR 16-2-1 Limit values for the DC power connection
according to EN 61000-6-3 not met
Interference emission EN 55011, EN 55022 Class B
Harmonic input current EN 61000-3-2 Met, class A limits
Voltage fluctuations, flicker EN 61000-3-3 Met, tested with non-pulsating constant
current loads.
This device complies with FCC Part 15.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must be
able to deal with any interference received, including interference that may cause undesired operation.
Switching frequencies
PFC converter 80kHz to 130kHz Input load and output voltage dependent
Main converter 75kHz to 180kHz Output voltage and output load dependent
Auxiliary converter 60kHz fixed frequency