Beckhoff PS1011-2420-0000, Документация

Страница: 10 / 32

Technical data, mounting, wiring
PS1011-2420-0000 10 Version: 1.0
3 Technical data, mounting, wiring
3.1 AC input
AC input
AC input Nom. AC 100-240V Suitable for TN, TT and IT networks with alternating voltage
AC input range Min. 90-264Vac Continuous operation
Min. 264-300Vac For up to 500 ms max.
Permissible voltage L or N to
earth Max. 300Vac Continuous according to IEC 60664-1
Input frequency Nom. 50-60Hz ±6%
Turn-on voltage typ. 81Vac Static, see Fig. Input voltage range ,
Shut-down voltage typ. 63Vac/71Vac At zero load / nominal load, static value, see Fig. Input voltage
range,
External input protection
See recommendations in chapter Safety instructions and installation requirements [ } 9]
AC input AC100V AC120V AC230V
Input current typ. 5.2A 4.3A 2.3A At 24V, 20A, see Fig. Input current over output current
Power factor
1)
typ. 0.99 0.99 0.97 At 24V, 20A, see Fig. Power factor over output current
Crest factor 2) typ. 1.6 1.7 2.0 At 24V, 20A
Start-up delay typ. 420ms 300ms 230ms See Fig. Switch-on behavior definitions
Rise time typ. 100ms 100ms 100ms At 24V, 20A constant current load, 0mF load capacity,
see Fig.
Switch-on behavior definitions
typ. 140ms 140ms 140ms At 24V, 20A constant current load, 20mF load capac-
ity, see Fig.
Switch-on behavior definitions
Turn-on overshoot Max. 200 mV 200 mV 200 mV See Fig. Switch-on behavior definitions
1)
The power factor is the ratio of real (or active) power to apparent power in an AC circuit.
2)
The crest factor is the mathematical ratio of the peak value over the RMS value of the input current waveform.
Fig. 1: Input voltage range; switch-on behavior definitions
Fig. 2: Input current over output current; power factor over output current