Beckhoff PS1011-2420-0000, Документация

Страница: 5 / 32

Overview
PS1011-2420-0000 5 Version: 1.0
1 Overview
PS1011-2420-0000 | Power supply 24 V, 20 A, 1-phase
• AC 100-240V wide-range input
• Active power factor correction (PFC)
• Width only 59mm
• Efficiency of up to 95.3%
• Safe hiccup overload mode
• Full power between -25°C and +55°C
• DC-OK relay contact
The PS1011-2420-0000 is a 1-phase 24 V power supply with an output current of 20 A and an output power
of 480 W.
On the input side, the device features a wide-range input, active power factor correction (PFC) and inrush
current limiting.
The output operates according to the UI characteristic curve and switches to the safe hiccup mode in case of
overload/short-circuit.
The power supply is part of the PS1000 family and has a width of 59 mm. A DC OK LED and a potential-free
relay contact monitor the status of the output voltage.
Overview of technical data
*)
Overview of technical data PS1011-2420-0000
Output voltage DC 24V (nominal factory setting 24.1V)
Adjustment range 24 - 28V
Output current 20.0 - 17.1A (amb. below +55°C)
12.5 – 10.7A (amb. at +70°C)
Linear load reduction b55°C and +70°C
Input voltage AC AC 100-240V ±10%
Mains frequency 50-60Hz ±6%
Input current AC 4.3 / 2.3A at 120 / 230Vac
Power factor 0.99 / 0.97 at 120 / 230 Vac
Efficiency 94.2 / 95.3% at 120 / 230Vac
Temperature range -25°C to +70°C
Dimensions (W x H x D) 59 x 124 x 127mm (without DIN rail)
Weight 810 g
Approvals/markings CE
cULus
IECEE
EAC
*) All values typical for 24V, 20A, 230Vac, 50Hz, +25°C ambient temperature and after a warm-up time of five minutes, unless other-
wise stated.