manualshive.com logo in svg

Beckhoff KL85 Series, Документация

Поделиться
Скачать
Beckhoff KL85 Series Скачать руководство пользователя страница 22

Product overview

KL85xx und KL9309

22

Version: 2.1.0

2.8

KL9309

2.8.1

KL9309 - Introduction

Fig. 8: KL9309

Adapter terminal for manual operating modules

The KL9309 adapter terminal has 16 terminal points, which provide the I/Os of the KL85xx manual operating
modules. An additional supply voltage (24 V

DC

) is provided via two terminal points (24 V, 0 V). The terminal

can be connected to the manual operating module via a system cable using a 20-pole pin contact strip with
locking.

The KL9309 has a modular design and can be incorporated seamlessly on the DIN rail. K-bus
communication is passed on by the terminal, but the terminal itself is not visible to the K-bus and is therefore
also not recognized by the bus coupler.

Two power contacts (24 V, 0 V) redirect the supply voltage to the downstream terminals, and four contacts
(2 x 24 V, 2 x 0 V) of the 20-pin connector make it available as power supply for the manual operating
modules.

Содержание KL85 Series




























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды