Beckhoff KL4132, Документация

Страница: 28 / 38

Access from the user program
KL4132 28 Version: 3.0
Address Name Default value R/W Storage medium
R0…R4 reserved 0x0000 R RAM
R5 [ } 28]
Raw DAC value variable R
R6 [
}
28]
Diagnostic register 0x0000 R RAM
R7 [
}
28]
Command register 0x0000 R
R8 [
}
28]
Terminal type 4132 R ROM
R9 [
}
28]
Software version number 0x???? R ROM
R10 [ } 29]
Multiplex shift register 0x0218 R ROM
R11 [
}
29]
Signal channels 0x0218 R ROM
R12 [ } 29]
Minimum data length 0x9800 R ROM
R13 [
}
29]
Data structure 0x0000 R ROM
R14 reserved 0x0000 R
R15 [ } 29]
Alignment register variable R/W RAM
R16 [
}
29]
Hardware version number 0x???? R/W SEEROM
R17 [
}
29]
Hardware compensation: Offset specific R/W SEEROM
R18 [ } 29]
Hardware compensation: Gain specific R/W SEEROM
R19 [
}
29]
Manufacturer scaling: Offset 0x0000 R/W SEEROM
R20 [ } 29]
Manufacturer scaling: Gain 0x0000 R/W SEEROM
R22…R30 reserved 0x0000 R/W SEEROM
R31 [
}
30]
Code word register variable R/W RAM
R32 [ } 30]
Feature register 0x0000 R/W SEEROM
R33 [
}
30]
User scaling: Offset 0x0000 R/W SEEROM
R34 [
}
30]
User scaling: Gain 0x0100 R/W SEEROM
R35 [
}
30]
User switch-on value 0x0000 R/W SEEROM
R36…R47 reserved 0x0000 R/W SEEROM
5.4 Register description
The registers can be read or written via the register communication. They are used for the parameterization
of the terminal.
R0 to R7: Registers in the internal RAM of the terminal
The process variables can be used in addition to the actual process image. Their function is specific to the
terminal.
• R0 to R4: reserved
• R5: Raw DAC value (Y_dac)
The 16-bit value transferred to the D/A converter is called raw DAC value. It is calculated from the
process data via the manufacturer and user scaling.
• R6 to R7: reserved
R8 to R15: Registers in the internal ROM of the terminal
The type and system parameters are hard programmed by the manufacturer, and the user can read them
but cannot change them.
• R8: Terminal type
The terminal type in register R8 is needed to identify the terminal.
• R9: Software version (X.y)
The software version can be read as a string of ASCII characters.