Beckhoff KL4132, Документация

Страница: 25 / 38

Access from the user program
KL4132 25 Version: 3.0
BK4000 Interbus Coupler
The BK4000 Interbus Coupler maps the KL4132 in delivery state with 4 bytes of output data (2 bytes of user
data per channel). Parameterization via the fieldbus is not possible. If the control and status byte is to be
used, the KS2000 configuration software is required.
Fig. 14: Mapping in the Interbus coupler – example for KL4132
Other Bus Couplers and further information
Further information about the mapping configuration of Bus Couplers can be found in the Appendix of the
respective Bus Coupler manual under
Master configuration .
The chapter on Mapping in the Bus Coupler [
}
26] contains an overview of possible mapping
configurations, depending on the configurable parameters.
Note
Parameterization with KS2000
The KS2000 configuration software can be used for parameterizations via the serial inter-
face of the Bus Coupler, independent of the fieldbus system.