Beckhoff KL1 Series Скачать руководство пользователя страница 35

Страница: 35 / 52

Mounting and wiring

KL1xxx

Version: 1.0.0

3.2

Installation instructions for enhanced mechanical load
capacity

WARNING

Risk of injury through electric shock and damage to the device!

Bring the Bus Terminal system into a safe, de-energized state before starting mounting, disassembly or
wiring of the Bus Terminals!

Additional checks

The terminals have undergone the following additional tests:

Verification Explanation

Vibration

10 frequency runs in 3 axes

6 Hz < f < 60 Hz displacement 0.35 mm, constant amplitude

60.1 Hz < f < 500 Hz acceleration 5

, constant amplitude

Shocks

1000 shocks in each direction, in 3 axes

, 6 ms

Additional installation instructions

For terminals with enhanced mechanical load capacity, the following additional installation instructions apply:

• The enhanced mechanical load capacity is valid for all permissible installation positions

• Use a mounting rail according to EN 60715 TH35-15

• Fix the terminal segment on both sides of the mounting rail with a mechanical fixture, e.g. an earth

terminal or reinforced end clamp

• The maximum total extension of the terminal segment (without coupler) is:

64 terminals (12 mm mounting with) or 32 terminals (24 mm mounting with)

• Avoid deformation, twisting, crushing and bending of the mounting rail during edging and installation of

the rail

• The mounting points of the mounting rail must be set at 5 cm intervals

• Use countersunk head screws to fasten the mounting rail

• The free length between the strain relief and the wire connection should be kept as short as possible. A

distance of approx. 10 cm should be maintained to the cable duct.

3.3

Connection

3.3.1

Connection system

WARNING

Risk of electric shock and damage of device!

Bring the bus terminal system into a safe, powered down state before starting installation, disassembly or
wiring of the bus terminals!

Overview

The Bus Terminal system offers different connection options for optimum adaptation to the respective
application:

• The terminals of ELxxxx and KLxxxx series with standard wiring include electronics and connection

level in a single enclosure.

Содержание KL1 Series





















































Результаты поиска

Содержание KL1 Series

Отзывы:

Похожие инструкции для KL1 Series

Бренды по названию

Популярные бренды

Beckhoff KL1 Series, Документация

Результаты поиска

Содержание KL1 Series

Отзывы:

Похожие инструкции для KL1 Series

Бренды по названию

Популярные бренды