Beckhoff EPI3 Series, Документация

Страница: 71 / 98

Commissioning/configuration of IO-Link master/device
EPI3xxx, ERI3xxx 71 Version: 1.2
Standard Command (Index 0x0002)
The IO-Link master writes various IO-Link-specific commands to the Standard Command during startup.
Some of these commands are available in the TwinCAT interface (see figure below). In the parameter list of
the
All Objects user role, click Standard Command , then double-click Standard Command in the right-hand
field. Select the desired value from the list of different options and use the Write button (as described above).
Device Reset : Restarts the IO-Link device.
Application Reset : No function.
Restore Factory Settings : Restoring the application parameters, i.e. the Settings parameter (0x0800).
Fig. 77: Parameters IO-Link device Standard Command
Application Specific Tag (Index 0x0018)
Application-specific information can be entered and stored here. Click Application-Specific Tag in the
parameter list, then double-click Application-Specific Tag in the right-hand field. Enter application-specific
information and use the Write button and the Store button, if required (as described above).