Beckhoff EP8309-1022, Документация

Страница: 13 / 116

Product Overview
EP8309-1022 13 Version: 2.0.0
General technical data
Technical Data EP8309-x022
Special features Multi-function module
Module electronic supply from the control voltage Us
Module electronic current consumption typically 120 mA
Sensor supply from load voltage Up, DC, any value up to 30 V
Actuator supply from load voltage Up, DC, any value up to 30 V
Power supply connection Power supply: 1 x M8 plug, 4-pole
Onward connection: 1 x M8 socket, 4-pole
Process image Inputs: 2 x 16 bit
Outputs: 2 x 16 bit
Electrical isolation Control voltage / fieldbus: 500 V
Weight approx. 165 g
Permissible ambient temperature during operation -25°C ... +60°C
Permissible ambient temperature during storage -40°C ... +85°C
Vibration / shock resistance conforms to EN 60068-2-6 / EN 60068-2-27
EMC immunity / emission conforms to EN 61000-6-2 / EN 61000-6-4
Protection class IP65, IP66, IP67 (according to EN 60529)
Installation position variable
Approvals CE, cULus
2.4 EP8309 - Process image
In the default setting the EP8309 is configured for:
• analog input channel 1
• analog input channel 2
• Tacho signal from two sensors on one axis (single-shaft mode)
• 6 digital inputs
• Status of PWM output
• Acknowledge / Reset in the event of a PWM error.
• 6 digital outputs
• General EtherCAT process data
AI Inputs Channel 1 and 2
The data for the first analog channel can be found under AI Inputs
Channel 1 .
Underrange: Value of the analog input is less than 0/4 mA or -10/0 V
Overrange: Value of the analog input is greater than 20 mA or +10 V
Limit 1: with activated Limit 1 (object 0x8000:07 [
}
80] = 1) means
1: value less than limit 1 (set in object 0x8000:13 [
}
80] )
2: value greater than limit 1 (set in object 0x8000:13 [
}
80] )
3: value equal to limit 1 (set in object 0x8000:13 [
}
80] )
Limit 2: with activated Limit 2 (object 0x8000:08 [ } 80] = 1) means
1: value less than limit 2 (set in object 0x8000:14 [ } 80] )
2: value greater than limit 2 (set in object 0x8000:14 [ } 80] )
3: value equal to limit 2 (set in object 0x8000:14 [
}
80] )
Error: This bit is set if over- or under-range was detected.