manualshive.com logo in svg

Beckhoff EL6652-00 0 Series, Документация

Поделиться
Скачать
Beckhoff EL6652-00 0 Series Скачать руководство пользователя страница 94

Commissioning

EL6652-00x0

94

Version: 2.5

5.4

Changing EtherNet/IP settings

With the following products the settings can also be changed by ADS.

• TS6280-xxxx | TwinCAT EtherNet/IP Slave (excluding Legacy Device), from TwinCAT Build 2249

• TS6281-xxxx | TwinCAT EtherNet/IP Master, from TwinCAT Build 2249

• EL6652 | EtherNet/IP Master Terminal (from software version 01V0.36)

• EL6652-0010 | EtherNet/IP Slave Terminal (from software version 01V0.36)

The 

Store Category

 must be defined in the System Manager for the setting. This is entered in the object

0xF800:2B "Advanced options" for all EtherNet/IP devices in the scanner or, for the slave interface, in object
0x8000:2B or 0x8010:2B for the optional 2

nd

 slave. 

If the corresponding flag is set, the IP address from the memory is used; if nothing is entered there the flag is
ignored and parameters from the System Manager are used.

Fig. 119: 

Object 0xF800, Master Settings

ADS-Write command

AMSNetId: 
In the case of the EL6652(-0010) this is the same as the EtherCAT AmsNetId; in the case of the supplement
the AMSNetId is to be taken from the System Manager.
Port: 
When using the EL6652(-0010) the port number is the corresponding EtherCAT Slave address of the
terminal. In the case of the EtherNet/IP supplement the port number is to be permanently set to 0xFFFF.
IDXGRP: 0x0001F480
IDXOFFS: 0x00000000

After adjusting the settings a TwinCAT restart is to be carried out in the case of the supplement, as well as
switching once to 

PreOp

 mode in the case of the EL6652. The new settings are then accepted on transition

to the 

OP

 mode.

Содержание EL6652-00 0 Series




















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды