manualshive.com logo in svg

Beckhoff EL6652-00 0 Series, Документация, Страница: 29 / 147

Поделиться
Скачать
Beckhoff EL6652-00 0 Series Скачать руководство пользователя страница 29

Installation

EL6652-00x0

29

Version: 2.5

Fixing of mounting rails

The locking mechanism of the terminals and couplers extends to the profile of the mounting rail. At
the installation, the locking mechanism of the components must not come into conflict with the fixing
bolts of the mounting rail. To mount the recommended mounting rails under the terminals and cou-
plers, you should use flat mounting connections (e.g. countersunk screws or blind rivets).

 WARNING

Risk of electric shock and damage of device!

Bring the bus terminal system into a safe, powered down state before starting installation, disassembly or
wiring of the Bus Terminals!

Mounting

• Fit the mounting rail to the planned assembly location.

 

and press (1) the terminal module against the mounting rail until it latches in place on the mounting
rail (2).

• Attach the cables.

Demounting

• Remove all the cables.

• Lever the unlatching hook back with thumb and forefinger (3). An internal mechanism pulls the two

latching lugs (3a) from the top hat rail back into the terminal module.

Содержание EL6652-00 0 Series




















































































































































Отзывы:

Нет отзывов