Beckhoff EL5032 Скачать руководство пользователя страница 34

Страница: 34 / 142

Mounting and wiring

EL5032, EL5032-0090

Version: 2.4

Mounting and wiring

5.1

Instructions for ESD protection

NOTE

Destruction of the devices by electrostatic discharge possible!

The devices contain components at risk from electrostatic discharge caused by improper handling.

• Please ensure you are electrostatically discharged and avoid touching the contacts of the device directly.

• Avoid contact with highly insulating materials (synthetic fibers, plastic film etc.).

• Surroundings (working place, packaging and personnel) should by grounded probably, when handling

with the devices.

• Each assembly must be terminated at the right hand end with an

EL9011

EL9012

bus end cap, to en-

sure the protection class and ESD protection.

Fig. 22: Spring contacts of the Beckhoff I/O components

5.2

Installation on mounting rails

WARNING

Risk of electric shock and damage of device!

Bring the bus terminal system into a safe, powered down state before starting installation, disassembly or
wiring of the bus terminals!

Содержание EL5032















































































































































Результаты поиска

Содержание EL5032

Отзывы:

Похожие инструкции для EL5032

Бренды по названию

Популярные бренды

Beckhoff EL5032, Документация

Результаты поиска

Содержание EL5032

Отзывы:

Похожие инструкции для EL5032

Бренды по названию

Популярные бренды