Beckhoff EL3413-0000, Документация

Страница: 135 / 200

Commissioning
EL34x3 135 Version: 4.4
5.5.1.4 PM Command (Index 0xFB00)
The command object is used for triggering an action in the terminal. The command is started by writing
subindex 1 (request). Write access is disabled until the current command is completed.
When writing the subindex, note that you cannot write directly in the "Hex" field; the "Binary" field must be
used for this. The input takes place in the reverse byte order, with space (see fig.
Writing the subindex 01,
object FB00 ).
Sample
To delete the energy values of all channels manually enter 0004
hex
in index 0xFB00:01 [ } 153] .
Fig. 151: Writing Subindex 01, Object FB00
5.5.2 Measurements
(Master TwinCAT 2.11 R3)