Beckhoff EK9300, Документация

Страница: 28 / 62

Parameterization and commissioning
EK9300 28 Version: 3.2.6
4 Parameterization and commissioning
4.1 Meaning of the DIP switch
10-pole DIP switch S001
The DIP switch has the following meaning for the Ethernet interfaces X001 and X002, which are switched:
Fig. 19: DIP switch S001: Left off ”0“, right on “1”
DIP 9 DIP 10 Description
DIP 1..8
Restart behavior Behavior with factory set-
tings
0 0 Last byte of the IP
address via DIP switches
1 to 8 • PN name from memory
• IP address via DIP switches
172.16.17.xxx (xxx DIP
switch)
SNM 255.255.0.0
• PN name becomes empty
string
• IP address via DIP switches
172.16.17.xxx (xxx DIP
switch)
SNM 255.255.0.0
0 1 DHCP
DIP switch 1 to 8 set to
OFF • PN name from memory
• IP address and SNM via
DHCP
• PN name becomes empty
string
• IP address and SNM via
DHCP
DHCP
DIP switch 1 to 8 set to
ON • PN name from memory
• IP address from memory
• PN name becomes empty
string
• IP address 0.0.0.0
1 0 Reserved
1 1 PROFINET-compliant
DIP switch 1 to 8 set to
OFF • PN name from memory
• IP address from memory
• PN name becomes empty
string
• IP address 0.0.0.0
PROFINET with fixed
name
DIP switch 1 to 8 set to
ON • PN name via
DIP switch 1 to 8
• IP address from memory
• PN name via
DIP switch 1 to 8
• IP address 0.0.0.0
2-pole DIP switch (under the flap between the battery and the SD card slot)
DIP switch (red) Meaning
1 off and 2 off normal mode, coupler is started
1 on and 2 off The EK starts in Config Mode; the internal Flash memory can be accessed via the
USB interface (for example for an image update).
1 off and 2 on Manufacturer's setting
1 on and 2 on No function so far
4.2 Further interfaces
Additional interfaces are located under the flap of the EK9xx0.