Beckhoff CP6900-0001-0000, Инструкция по установке и эксплуатации

Страница: 11 / 26

Product Description
2.4 Interfaces
X106
DVI in
X105
USB-E in X102 USB out1
X103 USB out2
M4 Ground
X101
Power X104
USB in
2.4.1 Power Supply (X101)
X101
Socket 5-pol RM3.50 Sw Screw Clamp BL3.5/180F (WEIDMÜLLER 1615810000)
The power supply for the Control Panel is established via the socket (X101) . The power supply connector
is included in delivery.
Pin Signal Pin Signal
1 NC 4 GND
2 NC 5 + 24 V
DC
Power Supply
3
2.4.2 USB out (X102, X103)
X102, X103
USB Type-A twin circuit board mounting (FCI 72309-0030B USB Double Receptacle A-Type)
The two USB interfaces ( X102, X103 , connector type A) are used for connecting peripheral devices with
USB connection. USB2.0 standard is supported in a distance of up to 5 m from the PC, from a distance of
5 m up to 50 m USB1.1 standard is supported.
Pin Signal Pin Signal
1 5V 3 D+
2 D- 4 GND
2.4.3 USB in (X104)
X104
USB type B, PCB installation (FCI 61729-0010B USB Receptacle B-Type)
The Control Panel is connected with the Industrial PC via the USB port ( X 104, connector type B).
USB2.0 standard is supported.
Pin Signal Pin Signal
1 5V 3 D+
2 D- 4 GND
CP6900-0001-0000/ CP6906-0001-0000 9