Beckhoff CP6606, Руководство пользователя

Страница: 32 / 40

Maintenance
CP6606 32 Version: 2.0
To change the battery, proceed as follows:
1. Pull the battery out of the Panel PC with needle-nose pliers.
2. Insert the new battery into the PC by hand. Make sure that the polarity is correct as shown in Fig. 18.
+
-
Fig. 18: CP6606_Replacing the battery
To dispose of the battery, remove it, tape off the poles and put it in the battery disposal.
6.2.2 Replacing the storage medium
New storage media should only be obtained from Beckhoff Service (see Chapter 9.1 Service and Support
[
}
35] ).
The CP6606 contains a MicroSD.
Data transmission before replacement
If you want to exchange a storage medium according to Beckhoff's recommendation, you must copy the data
from the old to the new storage medium. You can use the Beckhoff Service Tool (BST) for this purpose. The
BST is a graphical backup and restore program for Industrial PCs with a Windows operating system. You
can create an image of your operating system and use it to back up the operating system. You can then
restore the images created in this way. The BST is available on a bootable BST USB flash drive. This
includes Windows and a backup software. Select the size of the BST USB flash drive according to the size of
the backup copy of your operating system. You can then keep the flash drive as a backup copy. For this
purpose, the BST USB flash drives with SLC flash are designed for a particularly long data preservation. For
more information on the function of the BST, please refer to the corresponding documentation.
If your storage medium is defective and there is no backup, Beckhoff Service can provide you with a fresh
Windows image. For this to be possible, the Beckhoff IPC must already have been shipped with a valid
operating system license. When installing the fresh image, the applications must be reinstalled.
Exchange MicroSD
Chapter 6.2 Maintenance [
}
29] shows how to access the MicroSD.
To change the MicroSD, pull it out of the Panel PC (see Fig. 19). Then reinsert the new MicroSD into the PC
in the same orientation.
Fig. 19: CP6606_Replacing the storage medium
The old MicroSD must be disposed of in accordance with the national electronic scrap regulations.