Product Description
Power supply
X110
Power
The power supply for the Industrial PC is established via the
socket.
Additional plug-in cards (optional)
Type plate
There is a type plate on the top of the Industrial PC which provides
information about the hardware configuration of the Industrial PC at the
time it was supplied.
Ground connection
Ground connection
The Control Panel is grounded via the stud bolt.
Access to the drives and the battery
Access to hard-disk, CF-
Card and battery
After solving the knurled screw, the cap can be removed and allows access
to hard disk, battery and CF-Card.
Status-LEDs
Description of the Status-
LEDs
The Status-LEDs (
1 – 7
) are located
above the COM1 interface
(COM1)
:
1
PWR (Power):
green
green blinking
Busy
Standby
2
TC (TwinCAT):
red
green
blue
Stop Mode
Run Mode
Configuration Mode
3
IDE:
red
Access to an IDEdevice
4
FAN:
green
red
Fans running
Fan Error
5
USR (User):
Programmable
6
FB RUN (Fieldbus activ):
green
red
Activ
Not activ
7
FB Error (Fieldbus Error): red
Error
1 2 3 4 5 6 7
COM1
8
CP62xx
