Product Description
Product Description
Appropriate Use
The CP62xx Build-in Panel PC is designed for industrial application in
machine and plant engineering. A steel plate housing with aluminum front
contains a TFT display, touch screen/ pad (optional) and a PC keyboard
(optional). The Industrial PC is installed in the front of control cabinets.
Do not use the Build-in Panel PC in areas of explosive hazard!
DANGER
The build-in Panel PC must not be used where there is a risk of explosion.
Interfaces
Interfaces to the CP26xx
with 12“, 15“, 19“ and 24“
display
Fieldbus (additional interface, optional)
X101
Fieldbus
The Industrial PC has one fieldbus-interface (optional)
,
which is brought to
a 9 pin SUB-D plug connector.
Serial interfaces
X102
Serial Interface COM1
The Industrial PC has one serial interface COM1, using the type RS232,
which is brought to a 9 pin SUB-D plug connector.
COM2
Touchpad or additional
interface (optional)
The serial interface COM2 is connected to the touchpad (optional).
When the IPC is delivered without touchpad, you can order an additional
interface, using the type RS232 (C9900-E159), RS485 (C9900-E188) or
RS422 (C9900-E189).
COM3
UPS (optional)
The serial interface COM3 is connected to the UPS (optional).
COM4
Touchscreen (optional)
The serial interface COM4 is connected to the touchscreen (optional).
DVI (Digital Visual Interface)
X103
DVI out
The DVI connection is used for transferring the video signal. DVI-I standard
is supported.
USB-Interfaces
X104 – X107
USB out
The four USB interfaces are used for connecting peripheral devices with
USB connection. USB2.0 standard
is supported.
Network connection
X108
LAN1
The RJ-45 connector allows the PC to be connected to a 10/100BASE-T
Local Area Network (LAN).
X109
LAN2
The RJ-45 connector allows the PC to be connected to a 100/1000BASE-T
Local Area Network (LAN).
Knurled screw
CP62xx
7
