Mounting
CP37xx
17
4.2 Mounting the mounting arm tube
After feeding the connection cables of the Control Panel through the mounting arm tube (
1
), the mounting
arm tube will be positioned into the mounting arm adapter. Also the mounting arm tube is locked by
tightening the Allen screw in the region of the socket (
3
) with a 3 mm Allen key.
Proceed as follows to install the mounting arm tube:
•
First unscrew the Allen screw in the region of the socket (
3
) several cycles with a 3 mm Allen key.
•
Push the mounting arm tube (
1
) into the mounting arm adapter all the way to stop.
•
Now the slotted nut of the mounting arm adapter is tightened carefully clockwise, using a hook
wrench SW 58-62 (
2
).
•
Also the mounting arm tube is locked by tightening the Allen screw (
3
) with the 3 mm Allen key with a
torsion moment of 4.0 till 4.5 Nm.
Order Number Description
C9900-Z263
Hook wrench size 58
– 62 for tying up the slotted nut of the mounting arm adapter
C9900-M75x
The mounting arm adapter enables to tilt the Panel PC at +/- 20°.
After loosening the fixing knob (
4
) you can rotate the Panel PC about +/- 165°.
Note
Anti-twist protection
The mounting arm adapter is fitted with an anti-twist safeguard to avoid over winding
the Control Panel and damaging the connecting cables.
1
2
3
Fixing knob (
4
)
