Beckhoff C6920, Руководство пользователя

Страница: 20 / 52

Commissioning
C6920 20 Version: 3.2
4.2 Installation in the control cabinet
NOTE
Incorrect installation
Mounting the device in a way that deviates from the documentation can impair its functionality.
• Mount the device only in the orientations shown in the documents.
The C6920 Industrial PC is designed for installation in control cabinets in machine and plant technology.
Please observe the environmental conditions prescribed for the operation (see Chapter 9
Technical data
[
}
46] ).
Using different mounting plates, you can align the cable entry based on the application requirements.
Figure 11 shows the two available mounting plates: the standard mounting plate 1 and the optional mounting
plate 2. Mounting plate 1 in mounted on the rear panel of the Industrial PC and mounting plate 2 on the right-
hand side panel. In both cases, four M4 x 8 countersunk head Philips screws are used for mounting.
1 2
Fig. 11: C6920_Mounting plates
In the basic equipment version, the Industrial PC is delivered with mounting plate 1 already mounted as
shown in fig. 11. Mounting plate 2 is not included in the scope of delivery. You can choose the following
ordering options:
• C9900-M653: Mounting plate on the side panel instead of on the rear panel