Product Description
C6515
7
Interfaces
Interfaces to the
Industrial PC
Serial interface
RS 232
COM1
The Industrial PC has one serial interfaces, COM1 (
X102
), using the type
RS232, which is brought to a 9 pin SUB-D plug connector.
DVI (Digital Visual Interface)
DVI
The DVI connection (
X103
) is used for transferring the video signal.
USB-Interfaces
USB1
– USB4
The four USB interfaces (
X104
– X107
) are used for connecting peripheral
devices with USB connection. USB2.0 standard
is supported.
Network connection
Network 10/100BASE-T
The RJ-45 connector (
X108
) allows the PC to be connected to a
10/100BASE-T Local Area Network (LAN).
Network
10/100/1000BASE-T
The RJ-45 connector (
X109
) allows the PC to be connected to a
10/100/1000BASE-T Local Area Network (LAN).
Power Supply
Power supply
The power supply for the Industrial PC is established via the
socket (
X110
).
Additional plug-in cards (optional)
Type plate
There is a type plate on the top of the Industrial PC which provides
information about the hardware configuration of the Industrial PC at the
time it was supplied.
Ground connection
Ground connection
The Industrial PC is grounded via the stud bolt.
X102
X110
X109
X108
X106
X107
X103
X104
X105
stud bolt
