Beckhoff C5240, Инструкция по установке и эксплуатации

Страница: 8 / 33

Foreword
6 C5240
1.3 Basic safety measures
Before the Industrial PC is switched off, software that is running must be properly closed.
Otherwise it is possible that data on the storage medium is lost. Please read the section Switching the
Industrial PC on and off .
Warning
Switch off all parts of the equipment, then uncouple the fieldbus
Before opening the housing, and whenever the Industrial PC is not being used for
control purposes (such as during functional checks after a repair), all parts of the
equipment must first be switched off, after which the Industrial PC is to be
disconnected from the equipment.
Pulling out the fieldbus connection plug uncouples the PC (optional).
Items of equipment that have been switched off must be secured against being switched on again.
The Industrial PC’s power supply unit must be supplied with 100V
AC
– 240 V
AC
. Optional a 24 V
DC
power
supply unit with UPS is available.
DANGER
Do not open the power supply unit while voltage is applied!
The supply voltage must be switched off before the power supply unit housing is opened.
Warning
Do not exchange any parts when under power
When components are being fitted or removed, the supply voltage must be switched
off.
Fitting work on the Industrial PC can result in damage:
•
if metal objects such as screws or tools fall onto operating circuit boards.
•
if connecting cables internal to the PC are removed or inserted during
operation.
•
if plug-in cards are removed or inserted when the PC is switched on.