manualshive.com logo in svg

Beckhoff BK9055, Документация, Страница: 50 / 70

Поделиться
Скачать
Beckhoff BK9055 Скачать руководство пользователя страница 50

Error handling and diagnosis

BK9055 and BK9105

50

Version: 2.0.0

5

Error handling and diagnosis

5.1

Diagnostic LEDs

After switching on, the Bus Coupler immediately checks the connected configuration. Error-free start-up is
indicated when the red 

I/O ERR

 LED goes out. If the 

I/O ERR

 LED blinks, an error in the area of the

terminals is indicated. The error code can be determined from the frequency and number of blinks. This
permits rapid rectification of the error.

The Bus Coupler has two groups of LEDs for the display of status. The upper group with four LEDs indicates
the status of the respective fieldbus. The significance of the fieldbus status LEDs is explained in the
appropriate sections of this manual. It corresponds to the usual fieldbus display.

On the upper right hand side of the Bus Couplers are two more green LEDs that indicate the supply voltage.
The left hand LED indicates the presence of the 24 V supply for the Bus Coupler. The right hand LED
indicates the presence of the supply to the power contacts.

Fig. 43: BK9105 Diagnostic LEDs

Содержание BK9055







































































Отзывы:

Нет отзывов