Parameterization and Commissioning
BC5250
33
Version: 2.0.0
Fig. 25: Selecting the Bus Terminal Controller
The state of the Bus Terminal Controller is shown at the bottom right of the System Manager.
Fig. 26: State of the Bus Terminal Controller
Click on the red folder. The TwinCAT configuration will now be uploaded.
Fig. 27: Uploading the TwinCAT configuration
4.2.5
Resources in the Bus Terminal Controller
The memory resources assigned in the Bus Terminal Controller are shown in the System Manager in the
Resources
tab of the Bus Terminal Controller.
Mapping code
The mapping code is required for calculating the TwinCAT configuration (see Figure
Memory for the code
mapping
). The percentages are added here. In the example from Fig.
Memory for code mapping
, 8% of the
memory is allocated to the mapping calculation.
