Beckhoff AX8911, Документация

Страница: 22 / 65

Operation
AX8911 22 Version: 1.2.0
5.3 Configuration of the option in TwinCAT
5.3.1 Adding an axis module
When adding an axis module in TwinCAT 3, a distinction is made between a module with TwinSAFE drive
option and a module without TwinSAFE drive option. After adding a supply module, an axis module can be
added under the Drives category.
Fig. 2: Addition of an axis module
In addition to the manual creation of the configuration, it can also be created by scanning the EtherCAT line.
5.3.2 Using the AX8911 with the default project
The AX8911 TwinSAFE Drive Option, with which an STO function can be implemented, is installed in the
AX8xxx-x1xx and AX8xxx-x2xx devices. Information on this project can be found in
Default STO function in
the AX8911 [ } 32] .
To use the AX8911 in a project (e.g. EL6910), add an Alias Device AX891x (Safe Drive Module) .