Beckhoff AX2500 Series, Сборка, установка, настройка

Страница: 11 / 81

2.6 Nameplate
The nameplate depicted below is attached to the side of the servo amplifier.
2.7 Equipment description
2.7.1
Package as supplied
If you order a AX2500 series amplifier from us, you will receive:
— AX250x or AX251x (Master)
— Mating connectors for X0, X1, X3, X6
— Protective cover for the axis-side (required only once per system)
— Assembly and Installation Instructions
— Setup software DRIVE.EXE and online documentation on CD-ROM
alternatively
—
AX252x (axis module)
— Mating connector for X3, X6
— Short-form instructions
The mating SubD connectors are not part of the package supplied!
Accessories: (must be ordered separately if required)
— Electrical add-on fan (for max. 2 axes, required for AX25x6)
— Synchronous servomotor (linear or rotary)
— Motor lead (pre-assembled), or motor cable as cut-off loose connectors
(motor- and amplifier-side)
— Feedback cable (pre-assembled) or both feedback connectors, loose with
feedback cable as cut-off length
— External regen resistor BAR(U) (
ð
p.71)
— Communication cable to PC (
ð
p.56) for parameterizing the master and any
attached axis modules
— Power cable, control cables, fieldbus cables (as lengths)
AX2500 Installation Manual 11
Beckhoff
02/06
Technical description
Typenbezeichnung
Spannungsversorgung
Model Number
Power Supply
Ser. Nr
Nennstrom
Ser. No.
Nom. Current
Bemerkung
Schutzart
Comment
Encl.Rating
Eiserstr. 5
D-33415 Verl
Umgebungstemp.
Ambient temp.
E217428
1VD4
LISTED
IND. CONT. EQ.
C US
UL
®
5.76
008102106842
Tel.: +49-(0)5246/963-0
Fax: +49-(0)5246/963-149
Barcode
Serial Number
Barcode
Firmware
max.
ambient temperature