Beckhoff AMP8000, Руководство по эксплуатации

Страница: 59 / 109

Transport and storage
Version: 1.1
───
59 AMP8000 and AMP8500
WARNING
Protect AMP8000 from damage
During transport and storage, protect the distributed servo drive
system from damage and observe the conditions.
Damage may result in hazardous voltages being present on the
housing or exposed components and can lead to serious or even
fatal injuries.
Avoid damage and resulting loss of warranty
Observe the conditions and the following chapters on transport and
storage.
Failure to observe the conditions may result in damage to the dis-
tributed servo drive system and void the warranty.
Avoid short-circuit due to moisture
Condensed water can form during transport in cold weather or in
case of extreme temperature differences. Make sure that no mois-
ture collects in the distributed servo drive system. Equalize room
temperatures slowly. Switch the components and modules on only
when they are dry.
If the distributed servo drive system is not completely dry, conden-
sation can cause a short circuit when switching on and damage the
components and modules.
Do not remove the yellow protective cap
Do not remove the yellow protective cap on the drive shaft of the
distributed servo drive.
The protective cap protects against mechanical damage and envi-
ronmental influences. If you remove the protective cap, the shaft
may be damaged.