Beckhoff AMI8100, Руководство по эксплуатации

Страница: 46 / 61

Electrical installation
46 ─── Version: 1.0 AMI8100
9.1.2
Cables
Avoid soiling and damage
When connecting the socket and connector, make sure that the
poles and the inside of the component are not soiled or damaged.
Failure to do so may adversely affect the function of the connec-
tions.
Hint for trouble-free application and assembly:
• Wiring in accordance with applicable regulations and standards
• Pre-assembled and shielded Beckhoff cables
Beckhoff offers pre-assembled cables for faster and flawless instal-
lation of the servo drives. These cables are tested with regard to the
material used, shielding and connection type. Perfect functioning
and compliance with legal regulations, such as EMC and UL, are
guaranteed. The use of other cables can cause unexpected mal-
functions and result in exclusion of warranty.
9.1.2.1
Choice of cable
Observe the maximum permissible cable length
Use a maximum of 20 m cable length.
In case of non-observance, compliance with legal requirements is
not guaranteed. Faults and malfunctions as well as exclusion of
warranty can be the result.
Beckhoff connection cables differ from one another in the method of
laying, the type of connection and the core cross-section. In the ta-
ble below you will find an assignment of the different connection ca-
bles.
Connection cables for AMI812x
Order identifier Description
ZK2053-5200-0050 Power cable; 5 G 0.75 mm², M12, socket, straight, female, 5-pin,
L-coded - open end, 5-core, length 5 m
ZK2000-2100-0050 Sensor cable, 3 x 0.25 mm², M8, plug, straight, male, 3-pin, A-
coded - open end, 3-wire, length 5 m
ZK1090-3191-0050 EtherCAT cable, AWG 26, M8, plug, straight, male, 4-pin, A-coded
- RJ45, plug, straight, male, 8-pin, length 5 m
ZK1090-3131-2005 EtherCAT cable, AWG 26, M8, plug, straight, male, 4-pin, A-coded
- M8, plug, straight, male, 4-pin, A-coded