Becker P5-20-C18 PLUS, Руководство по сборке и эксплуатации

Страница: 10 / 36

Commissioning with a CentronicPLUS transmitter
Explanation of symbols
UP button
STOP button
DOWN button
Programming button (on the transmitter)
Function button (on the transmitter)
LED ring on the transmitter
Receiver confirms once or multiple times by “clicking” or “shifting”
1 = direction switch
2 = radio switch
Operating modes
Normal mode Control of selected receiver / channel
Receiver selection Selection of the required receiver and channel allocation
Setting mode Commissioning and administration of selected receivers
Attention
The tubular drives are designed for short-time operation. An inbuilt thermal protection
switch prevents overheating of the tubular drive. During commissioning (long drop dis-
tance or long running time), the thermoswitch may trigger. The drive will switch off. After a
short cooling-down period, the system is ready for operation again.
The drive does not achieve its full duty cycle until it has cooled to ambient temperature.
Avoid a situation where the thermal protection switch cuts in repeatedly.
10 - en