Operating Instructions
Becker Avionics
Disposal
8
VHF Transceiver 0638.420-071 Issue 06 02/2021
If you do not install the device immediately, make sure to store it in a dry and clean
environment. Make sure that the device is not stored near strong heat sources and
that no metal chippings can get into the device.
The packaging material is inflammable, by burning toxic fumes
may develop.
This product contains materials that fall under the special disposal regulation. We
recommend the disposal of such materials in accordance with the current
environmental laws.
•
Dispose circuit boards by a technical waste dump which is approved to take
on e.g. electrolytic aluminum capacitors. Do under no circumstances dump
the circuit boards with normal waste dump.
The device(s) may be installed on an aircraft only by an approved
aeronautical company (e.g. Part 145) which shall also examine
the installation.
Any change made by the user excludes any liability on our part (excluding the work
described in this manual).
With this device you bought a product which was manufactured and tested before
delivery with the utmost care.
Please take your time to read the instructions which you ought to follow closely
during installation and operation.
Otherwise all claims under the warranty will become void and a decreased service
life or even damages must be expected.
The user is responsible for protective covers and/or additional
safety measures in order to prevent damages to persons and
electric accidents.
We checked the contents of this publication for compliance with the associated hard
and software. We can, however, not exclude discrepancies and do thus not accept
any liability for the exact compliance. The information in this publication is regularly
checked, necessary corrections will be part of the subsequent publications.
