Becker 0622.834-923, Инструкция по установке и эксплуатации

Страница: 20 / 52

Installation
Mounting Requirements
20 GK61X-XX DV16800.03 Issue 03 08/2015
2.3. Mounting Requirements
The device must not be opened.
When installing the device, make sure the heat dissipator of the
device receive sufficient air. Keep an efficient distance of the devices
with integrated ventilator fans in order to ensure free circulation of the
cooling air.
Make sure that the mounting plate is not exposed to external
temperature influences.
Wiring:
The following general precautions are to be observed.
• All electrical systems in the vehicle shall be switched off and
screened.
• No other leads should be included in the supply lead loop.
• All cable terminations to the equipment shall be marked.
• The cable harness must be able to move freely and thus
prevent fracture of the wires. It should also be placed in a
manner that the individual cables are not abraded on the
cabinet or chassis.
• Twisted, screened cables should be used for symmetrical
connections to minimise interference from electrical and
magnetic fields.
2.3.1. Installation in a Vehicle
• Please use the car mounting bracket for installation.
• Make sure to find a suitable spot to place the three bolts.
• Please check easy access to the controls and indicators of the GK61X-XX.
• Detailed information please see "Dimensions", page 21.