BECKER-Antriebe L120/11C PS(+)SMI, Руководство по сборке и эксплуатации

Страница: 21 / 24

Type L80/11C
PS(+)SMI
L80/17C
PS(+)SMI*
L120/11C
PS(+)SMI
Rated torque [Nm] 80 80 120
Output speed [rpm] 11 17 11
Limit switch range 64 revolutions
Supply voltage 230 V AC / 50 Hz
Connected load [W] 310 470 435
Rated current con-
sumption [A] 1.40 2.10 1.90
Mode S2 4 min
Degree of protection IP 44
Min. tube inside dia-
meter [mm] 60
Emission sound pres-
sure level [dB(A)] ≤ 70
*) This tubular drive is not yet available.
Sample wiring diagram
Controlling one/several drive(s) via a single KNX/SMI actuator
Central control of up to 8 drives possible
Button operation is activated by turning the power supply on and off.
The drive permanently changes to SMI mode as soon as SMI bus voltage is detected on the
I+ and I- lines.
Technical information as well as the KNX product database can be found on our homepage www.becker-antriebe.com
21