BEC BEC MX-230 M1 Скачать руководство пользователя страница 31

Страница: 31 / 110

Device Configuration

Status

– Device Info

BEC MX-230 M1 User Manual

Status

Device Info

It provides brief status summary of the device.

Device Information

Model Name:

Name of the router for identification purpose.

Firmware Version:

Software version currently loaded in the router

MAC Address:

A unique number that identifies the router

Data Time:

Setup correct time on the

MX-230 M1

with your PC. Check on

Time Zone

section for

more configuration information.

System Uptime:

Display how long the

MX-230 M1

has been powered on.

Physical Port Status

：

Display available connection interfaces, WAN (3G/4G-LTE, EWAN) and LAN

(Ethernet) are supported in the MX-230 M1.

WAN

Interface:

List current available WAN connections.

Protocol:

Display selected WAN connection protocol

Connection:

The current connection status.

IP Address:

WAN port IP address.

Default Gateway:

The IP address of the default gateway.

LAN

IP Address:

LAN port IPv4 address.

Subnet Mask/Prefix Length:

Display LAN port IP subnet mask of IPv4 and/or Prefix length of IPv6.

Содержание BEC MX-230 M1















































































































Результаты поиска

Содержание BEC MX-230 M1

Отзывы:

BEC BEC MX-230 M1, Руководство пользователя, Страница: 31 / 110

Результаты поиска

Содержание BEC MX-230 M1

Отзывы: