LB-220BT LED Beat
Portable LED Bluetooth Speaker
ArtNr 00044046
Please read these instructions carefully
before using the device and retain for
future reference
Important Safety
Instructions
Keep the unit away from
heat
sources,
direct
sunlight, humidity, water
and any other liquids. Do
not operate the unit if it
has been ex-posed to
water, moisture or any
other liquids to prevent
against electric shock,
explosion and/or injury to
yourself and damage to
the unit. Do not use the
unit if it has been dropped
or damaged in any way.
Repairs
to
electrical
equipment should only be
performed by qualified staff. Improper repairs may
place the user at serious risk. Do not use the unit
with wet hands. Do not put objects into any of the
openings. Keep the unit free from dust, lint etc. Do
not use this unit for anything other than its intended
use. Keep the unit out of reach of small children. This
product is not a toy. Do not use chemical cleaning
solvents to clean. Do not open the device. For
cleaning only use soft and dry cloth.
Getting Started
Unpack the Bluetooth speaker & accessories.
Remove all packaging from the Bluetooth speaker.
Check if the box and accessories is not damaged.
Package contents
LB-220BT LED Beat Bluetooth Speaker
Instruction Manual
USB charging cable
3.5mm stereo audio cable
Player / Operation controls
Charging
Power off the device (MP3/OFF/BT switch in middle
position). Connect the USB charging cable with a USB
net adaptor or USB computer socket. Connect the
opposite side of charging cable with DC5V/ANT input
socket. During charging the LED indicator light will
show red light. When the device is fully charged, the
LED turns off. Charging will take 3-4 hrs. After
charging disconnect the loading cable. Play time is
depending on volume setting.
Operation Modes
You can use the speaker in different operation
modes / playing modes (AUX
Bluetooth
FM
Radio
USB/SD). When the speaker is connected to
a smartphone by Bluetooth it can receive phone calls
and work as speaker phone.
USB device / Micro SD card (TF)
Insert a USB storage device (USB stick) or Micro SD
card in USB socket or card slot (TF). Switch on the
speaker to MP3 mode. The player can play music
files in MP3 format. Please take care that the files
are stored in the main root of the device. No folders
are allowed to be on the storage device.
Controls and operation:
Press Pause/Play button
(>II) to control music playback. Long press volume up
button (+) to increase the volume, volume down
button (-) to decrease the volume. Short press of
these buttons will play next/previous track.
Bluetooth pairin
g
Switch the mode switch to “BT” position, the
speaker will send a signal tone the device is ready in
searching/pairing/reconnect mode. For first time
pairing switch on Bluetooth function on your smart
phone or Bluetooth player. Scan for Bluetooth
devices. Connect with “
LB-220BT
” device. The device
will confirm connection with a signal tone.
After power off/on the signal tone will and the
speaker will reconnect automatically if your mobile
phone has been paired previously. The device will
confirm connection with a signal tone.
Note:
Depending on the device’s type and
configuration, manual reconnection may be
required.
With the play and volume controls on the Top side of
the speaker you can control the playback. Or you can
use the control functions on your Bluetooth device.
Speaker phone
When your smartphone is connected by Bluetooth
you can use the device as phone speaker. When a
call is coming in press the mode (M) button on top of
the speaker to answer the call. Use the microphone
for speech. Finish the call by pressing the mode
button again. Use volume +/- buttons to adjust
volume. By short pressing the mode button twice
the last number will be redialed.
LINE (AUX) Function
Switch on the speaker to MP3 mode and use the
3.5mm stereo audio cable to connect your devices
(player, smartphone) auxiliary output port with the
LB-220BT AUX in jack. Start and navigate the tracks
on your player. Max. loudness can be adjusted with
volume control buttons (see USB/SD operation).
Disconnect the auxiliary cable when finished.
FM Radio Mode
Remove AUX cable and USB/SD storage devices.
Switch on the speaker to MP3 mode. Short press the
mode (M) button on top of the speaker to start the
automatic search for radio stations. All detected
stations are stored. With
I<<
and
>>I
buttons you can
navigate through the stations which are in storage.
Long press volume up button (+) to increase the
volume, volume down button (-) to decrease the
volume.
LED Function
When you turn on the speaker the LED effect will
start working immediately. The light effect can be
turned on and off by pressing the LED button on top
side of the speaker.
Please Note
Not all mobile phones support all the functions listed
above. Please refer to your mobile phones user
manual for further information.
Certain functions and indication tones may vary
depending on your mobile phone. When the volume
is adjusted to max, you will hear an indication tone.
Musikhaus Kirstein GmbH
Bernbeurenerstrasse 11
86956 Schongau/Germany
www.kirstein.de
CE compliance
The CE-marking which is made on your product
and/or packing resp. user manual confirms the
compliance of the product with all for this item
related harmonized EC directives. You can download
the EC declaration of conformity for this item under
download link below:
Http://www.kirstein.de/docs/Konformitaetserklaer
ung/CE_Konformitaetserklaerung_000xxxxx.pdf
Please replace the placeholder „xxxxx“ by the last 5
digits of the product article number.
Bluetooth specification
Bluetooth V2.1 + EDR
BT operating distance
10m (max.)
Frequency
150Hz-20KHz
Speaker power
2x3W
Rechargeable Lithium Battery
3.7V / 1200mAh
Charging Time
approx. 4 hrs
Playing Time
approx. 2 hrs
