f
small carrier bracket
Small Bracket
Dimensions
Installation 2DIN-40mm Width×25mm Height×
８５ｍｍ
Depth Weight:210g Brackets, Adapter
Package Content
Panel Carrier Brackets(4pcs), Large Nut(8),Small Nut(4), L-Screws(2), S-Screws(4), Tapping(6)
Face Trim Frame(1), Antenna adapter extension cable(1), Audio electronic adapter with
OEM coupler(1)
Mount all components in locations that will not inhibit safe driving or obstruct the motions of the various components
of the vehilce functions,Be cautious so as not to damage wires,pipng ,tanks and other areas as installed in the
vehicle. Avoid wet, dusty,or areas of extreme temperatures for installation
Any damages resulting to the automobile of aftermarket audio systems as result of inproper installations or careless
installation prodecres are not covered by any warranty, nor are we responsible for any injuries or damages resulting
from the installation process. Please observe caution when performing installation.
Amplifier Remote Wire
Depending on the manufacturer or
model of the aftermarket radio, the
refernce and names of the Amplifier
Remote Trigger Wire may differ,
Please refer to the instructions as
provided by the respective audio
unit to be installed.
Please make ALL of the following
connections for proper operation
Aftermarket Head Unit
Front Speaker Output
Black/Negative Ground(-)
Red/Ignition Power ACC(+)
Yellow/Battery Co)
Orange/Illumination Dimmer
Blue/Amplifier Remote
Adapter
20Pin Lexus Head Unit
Harness Coupler
Check that all components function as well as electical functions of the vehicle
Check all electrical connections, plug the
antenna extension cable and
mount the head unit
Mount the SLA-23 audio adapter
in a location clear of other components
inside the center console.
Before mounting the brackets,attach
the Lexus guide hooks as shown using
2 supplied screws.
Guide Hoooks
Attach the head unit assebly in to the face trim frame using the supplied screws
Installation of the aftermarket audio head unit
Attach the supplied carrier main brackets as shown using 3 screw
on each side supplied by the aftermarket head unit
Large Carrier Bracket
The main carrier
brackets are
adjustable depending on the
depth or position requirements
of the aftermarket head unit
Installation Manual(1) Warranty Card(1)
From the Lexus heat unit, remove the two guide tabs and the 2 carrier brackets
by removing 2 screws on each tab
These parts will be necessary for the
installation of the aftermarket head unit.
*Note: If the car is equipped with a compass unit, it is located under the air conditoner control unit.
This unit must be removed by unclipping it from the AC controller or relocated for use with 2DIN sized head
unit to clear enough space
Assemble the Lexus carrier Brackets onto the assembly as well as the
supplied small carri
Lexus Carrier Bracket
screw
screw
screw
screw
Remove the two 8mm bolts on each side of the CD
changer and the entire head unit assembly with CD
unit will release with 2 clips at the sides. Slowly
guide the entire assembly out of the console
2 hooks
2 bolts
Remove the upper swiuch panel console
by removing 3 screws at the bottom and
gently releasing the two clips at the sides.
2hooks
3screws
Removal of the original Lexus head unit
Remove the lower switch panel just
above the shiffer gate panel by
gently prying on the clips behind
the panel
2hooks on left and right
edges
Always disconnect the negative terminal of the vehicle battery before installation.
Protect all wires that must be located near sharp metal parts of the vehicle.
Check after installation that all vital features such as wipers, lights, brake lamps, etc
are in working order in addition the installed systems.
***Make sure that the original audio head unit and sound systems are in working order.
This kit is not designed to resolve issues that existed before installation.
Lexus LS430
Installation Manual
Thank you for your purchase of the Beat-Sonic Sound Adapter SLA-23A
Please read the following instructions carefully durning installation and operation
2001~2003
Lexus LS430
Model
Model Year
Model Chassis Code
During Installation
