Beast-Tek Instruments Parasite V1.2, Руководство по сборке

Страница: 11 / 28

www.beast-tek.com Parasite Build Guide
Page 11
IO Board – Step 10
Now that everything is seated nicely, solder the rest of the pins. Pay close attention to the 1P4T
switches – you don’t want to solder the single pin holding it in until last – heating that pin will
make the switch fall out and you will need to go back to step 1. Slowly and carefully solder the
pins of the 1P4T switches – they are sitting flush with the bottom of the PCB so make sure you
get a good solid solder joint.