www.beamzlighting.com
3. Installation
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly fixed to avoid vibration and
slipping while operating. Always ensure that the structure to which you are attaching the unit is secure and is able to support a
weight of 10 times of the unit’s weight. Also always use a safety cable that can hold 12 times of the weight of the unit when
installing the fixture.
The equipment must be fixed by professionals. And it must be fixed at a place where is out of the touch of people and has no one
pass by or under it.
4. How To Control The Unit
Four ways to operation:
A. Master/Slave operation
B. Easy sound active and Auto mode
C. Universal DMX controller
D.IR remote control
Master/Slave operation
The unit can be linked together in daisy chain as many as you need in master/slave mode to perform the great built-in
pre-programmed lighting shows triggered by music.
In Master/Slave mode refer to the DMX settings below:
Master unit: when working at
Auto
or
Sound
Control mode operation
Slave units: DMX start address MUST be set to d001.
Menu for “IR 1” receive IR remote signal, Menu for “IR 0” stop receive IR remote signal.
LED digital display Menu function as below:
DMX code setting: d001~d512
CH1 0~255
Red
CH2 0~255
Green
CH3 0~255
Blue
CH4 11~255
LED Strobe
(
From slow to fast
)
CH5
11~50 Auto1
DMX(Strobe)
51~100
Auto2 DMX(No Strobe)
101~150
Auto3 DMX (
smooth changing color
)
151~200
Sound1 DMX (Strobe)
201~250
Sound2 DMX (No Strobe)