2. Introduction
2.1 Features
•
15 channel DMX-512 .
•
Pan:585°,
Tilt:315°
•
Variable electronic strobe.
•
Variable electronic dimmer(0-100%).
•
LED display menu with invert.
•
Reset to factory settings option.
•
Pan/tilt invert option.
•
Fan
cooled.
•
Optional
controllers.
2.2 DMX channel:
3. Setup
Disconnect the power cord before replacing a fuse and always replace with the same type fuse.
3.1 Fuse replacement
With a flat head screwdriver wedge the fuse holder out of its housing. Remove the damaged fuse from its
holder and replace with exact same type fuse. Insert the fuse holder back in its place and reconnect
power.
3.2 Fixture linking
You will need a serial data link to run light show of one or more fixtures using a DMX·512 controller or to
run synchronized on two or more fixtures set to a master/slave operating mode. The combined number
of channels required by all the fixtures on a serial data link determines the number of fixtures the data
link can support.
Maximum recommended serial data link dislance:500 meters(1640ft).
Maximim recommended number of fixtures on a serial data Iink:32 fixtures.
Data cabling
To link fixtures together you must obtain data cables. If you choose to create your own cable please use
data-grade cables that can carry a high quality signal and are less prone to electromagnetic interference.
Channel Function
1 Dimmer
2 Red
3 Green
4 Blue
5 Strobe
6 Color
changing
7 Color
changing
8 Color
changing
9 Pan
585°
10 Tilt
315°
11 Pan
fine
12 Tilt
fine
13 Pan
speed
14 Tilt
speed
15 Zoom
