BeamMed Sunlight Omnisense 7000S, Руководство пользователя

Страница: 175 / 284

Omnisense 7000S/8000S
10-1
CHAPTER 10
System Administration
10.1 User Access Levels
When you enter the system for the first time, you have the sta-
tus of System Administrator. The user ID is “Sunlight” and the
password you entered with
Change Password
remains the
Administrator password unless you change it. All System
Administrator functions require that password. Only one Sys-
tem Administrator is defined. Other users have more limited
access privileges.
A user’s access level is a function of two parameters — the
User Type
and
Associations
.
User Type.
There are three user types — the System Admin-
istrator , physicians and operators .
•
The System Administrator has the highest level of access.
There is only one System Administrator.
•
Physicians have access to their own patient data and the
data of patients not assigned to any particular physician,
but not the data of other physicians.
•
Operators have access only to unassigned patient data.
However, they may be associated with one or more phy-
sicians, as described next.
Associations.
An operator may be associated with one or
more physicians. This association gives the operator access
to the physician’s patient data. This feature supports use of
Omnisense by clinic assistants and other non-physician per-
sonnel, under the supervision or responsibility of a particu-
lar physician. Associated status is conferred only by
physicians.
The User List dialog window serves as a center for determining
user access privileges. In this dialog box, new users are added
or removed and operators are associated or disassociated with
physicians. Figure 10.1 shows the User List screen.