Beam MG200, Руководство пользователя

Страница: 65 / 291

MG200 USER MANUAL
65 of 269
©
2019 BEAM
3.1.2.2 Ethernet WAN Connection Setup
To select WAN/LAN1 RJ45 port as the Ethernet WAN connection port, in Physical Interface configuration
window, select Ethernet.
Interface Configuration
Item
Value setting Description
Physical Interface
WAN-1 is the
primary interface
and is factory set to
Always on. Select one expected interface from the available interface
dropdown list. It can be
3G/4G , Ethernet or Wi-Fi Module .
Operation Mode
A Need to select
setting.
Define the operation mode of the interface.
Select
Always on to make this WAN always active.
Select Disable to disable this WAN interface.
Select Failover to make this WAN a Failover WAN when the
primary or the secondary WAN link failed. Then select the
primary or the existed secondary WAN interface to switch
Failover from.
(Note: for WAN-1, only
Always on option is available.)
VLAN Tagging Optional setting.
Check Enable box to enter tag value provided by your ISP.
Otherwise uncheck the box.
Value Range: 1 - 4095.
Note: This feature is NOT available for 3G/4G WAN
connection.
Save Button.
Click Save to save the settings.
Undo Button.
Click Undo to cancel the settings.
To edit the Ethernet WAN connection setup, click Edit on WAN-2.